Rezidential

Industrial

Automation

 

Automation > Control units > CITY1

Control units - CITY1

Digital control unit for swing gates and sliding gates (230V /120V)
  • 230V / 120V power supply for 2 single-phase motors (700W max) without limit switch.
  • Inputs for photocells and mechanical safety edge.
  • Plug-in terminal boards.
  • Quick-connector for plug-in MR1 receiver unit.
  • Output for 12V electric lock.
  • Plug in modules allow addition of new functions.
  • Automatic learning of operation times.
  • Innovative obstacle detection: allows for 10 levels of sensitivity adjustment for the obstacle sensor.
  • Integrated counter function displays the number of operation cycles carried out. A counter value can be preset to indicate a service requirement when reached.
  • Operation by means of mechanical limit switches connected to the control unit or connected in series to the motor.
  • Slow down function on closing to minimise noise and prevent gate recoils.
  • SOFT start: it is possible to introduce a slow start to each motor in the opening phase.
  • IP55 case.

Optional modules

Mr1: 433,92 MHz super-heterodyne receiver module with memory

  • 4 channels available, working with different logics according to the control unit in use
  • Possibility to store up to 240 codes of different transmitters
  • The Mr1plus version can store up to 1008 different codes
  • Series Mr1 includes now the following monofrequency receivers:
    - Mr1/434: 434,15 MHz plug-in receiver
    - Mr1/868: 868,3 MHz plug-in receiver
    - Mr1r: 433,92 MHz plug-in receiver (for transmitters with dip-switch codification)
  • Self-learning operation of the transmitters by radio
  • Rolling Code mode

Lux1: Activates a timer or a bistable relay for courtesy lights already installed in the system

Lux2: Provides control of two independent and programmable relay outputs with 8 different functions (auxiliary monostable channel, warning light, intermittent flashing unit, "go ahead” light with gate in pause position, courtesy light with gate in movement, stair light impulse, courtesy light / timer at start of cycle, auxiliary bistable channel)

Cl1: Locks the control unit avoiding programme changes by unauthorised people and allows copying the content of the memory in order to transfer it to other control units of the same model