Rezidential

Industrial

Automation

 

Residential > Door frames > Standard frames

  • Brickwork corner
  • Brickwork wrap-around
  • Partition wall
  • Gypsum wall

Brickwork corner frames

Material:
Hot galvanized thin sheet, 1.5 mm thick, EC-primed, pale grey.

Hardware: 
4 hinge pockets V8610, mortar-tight, usable L/R, prestamped lock holes, wall protection box, continuous seal rebate on 3 sides, floor recess 30 mm, marked, spreader bar screwed, handle height 1050 mm above finished floor, metre marking both sides in the area of the pre-punched bolt holes, 6 corner anchors, NTK seal with sealing lip, loose.

 

Brickwork wrap-around frames

Material:
Hot galvanized thin sheet, 1.5 mm thick, EC-primed, pale grey.

Hardware:
4 hinge pockets V8610, mortar-tight, L/R-usable, prestamped lock holes, wall protection box, continuous seal rebate on 3 sides, floor recess marked 30 mm, marked spreader bar screwed, handle height 1050 mm from finished floor, metre marking both sides in area of pre-punched bolt holes, 8 RZ anchors (or wire anchors), NTK seal with sealing lip, loose.

 

Partition wall frames

Material:
Hot galvanized thin sheet, 1.5 mm thick, EC-primed, pale grey.

Hardware:
4 hinge pockets V8610, mortar-tight, usable L/R, prestamped lock holes with protection box, continuous seal rebate on 3 sides, without floor recess, spreader bar screwed 15 mm above bottom edge of door frame, handle height 1050 mm, metre marking both sides in the area of the pre-punched bolt holes, 3 stirrup anchors per side depending on the size of the opening, NTK seal with sealing lip, loose.

 
   

Hardware:
4 hinge pockets V8618, usable L/R, prestamped lock holes with protection box, continuous seal rebate on 3 sides, without floor recess, spreader bar screwed 15 mm above bottom edge of door frame, handle height 1050 mm, metre marking both sides in the area of the pre-punched bolt holes, 3 stirrup anchors per side depending on the size of the opening, NTK seal with sealing lip, loose.

 
   

Gypsum wall frames

From subconstructions that have proven their worth millions of times to innovative further developments, Novoferm hinge subconstructions guarantee optimum stability and security.
   

Material:
Hot galvanized thin sheet, 1.5 mm thick, EC-primed, pale grey.

Hardware:
4 hinge pockets V8610, mortar-tight, L/R-usable, prestamped lock holes, wall protection box, continuous seal rebate on 3 sides, floor recess marked 30 mm, marked spreader bar screwed handle height 1050 mm from OFF, metre marking both sides in the area of the pre-stamped bolt holes, 6 RZ anchors. NTK seal with sealing lip, loose.