Fuego classic
ready-to-install structure of electrogalvanized, yellow chromated precision profile steel tubes of monocoque construction, surface flushed.

Door units
1 or 2-leaf, fire-resistant, with 2 x EPDM stopper seal, optional fanlight(s) and/or side part(s).

Wall units
permanently glazed, fire-resistant, optional connecting units.

Hardware
Engaging mortice lock, top latch from FOD 1,510 x 2,330 mm and for all 2-leaf doors. With right-angle bent aluminium rounded handle set with steel core and oval rosette plates, upper door closer with slide channel, 2-leaf doors with closing sequence control and rebate retracting bolt over and above headroom 2,500 mm.

Hinges
2-3 steel weld-on hinges for each leaf, 3-D adjustable.

Surface
powder-coated, primed RAL 9002, optional final paint-coating (if applicable extra charge).

Cross section Fuego classic, one-leaf door with side part

Cross section Fuego classic, two-leaf door

Establishing the clear passage width with leaf open at 90°

Weld-on hinge 15 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 201 mm

Attention:
Installation height standard handle set 78 mm!

Establishing the clear passage width with leaf open at 90°

Screw-on hinge 25 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 210 mm

Attention:
Installation height standard handle set 78 mm!

Fuego light T30
ready-to-install structure of electrogalvanized, yellow chromated precision profile steel tubes of monocoque construction, surface flushed.

Door units
1 or 2-leaf, fire-resistant, with 2 x EPDM stopper seal, optional fanlight(s) and/or side part(s).

Wall units
permanently glazed, fire-resistant, optional connecting units.

Hardware
Engaging mortice lock, top latch with all 2-leaf doors and smokeproof variant. With right-angle bent aluminium rounded handle set with steel core and oval rosette plates, upper door closer with slide channel, 2-leaf doors with closing sequence control and rebate retracting bolt over and above 2,500 mm headroom.

Hinges
2 steel weld-on hinges for each leaf, 3-D adjustable.

Surface
powder-coated, primed RAL 9002, optional final paint-coating (if applicable extra charge).

Cross section Fuego light T30, one-leaf door with side part

Cross section Fuego light T30, two-leaf door

Establishing the clear passage width with leaf open at 90°

Weld-on hinge 15 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 188 mm

Attention:
Installation height standard handle set 78 mm!

Establishing the clear passage width with leaf open at 90°

Screw-on hinge 25 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 198 mm

 Attention:
Installation height standard handle set 78 mm!

Fuego light T90
ready-to-install structure of electrogalvanized, yellow chromated precision profile steel tubes of monocoque construction, surface flushed.

Door units
1 or 2-leaf, fire-resistant, with 2 x EPDM stopper seal, optional fanlight(s) and/or side part(s).

Wall units
permanently glazed, fire-resistant, optional connecting units.

Units variants are partly in process of certification.

Hardware
Engaging mortice lock with top latch with all doors. With right-angle bent aluminium rounded handle set with steel core and oval rosette plates, upper door closer with slide channel, 2-leaf doors with closing sequence control and rebate retracting bolt.

Hinges
3 steel weld-on hinges for each leaf.

Surface
powder-coated, primed RAL 9002, optional final paint-coating (if applicable extra charge).

Cross section Fuego light T90, one-leaf door

Cross section Fuego light T90, two-leaf door

Establishing the clear passage width with leaf open at 90°

Weld-on hinge 16 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 194 mm

Attention:
Installation height standard handle set 78 mm!

Presto
ready-to-install structure of electrogalvanized, yellow chromated precision profile steel tubes, surface flushed.

Door units
1 or 2-leaf, smokeproof, with lowerable floor seal, with 2 x EPDM stopper seal, optional fanlight(s) and/or side part(s).

Wall units
permanently glazed, optional connecting units.

Hardware
Engaging mortice lock, top latch from FOD 1,330 x 2,370 mm and for all 2-leaf doors, with right-angle bent aluminium rounded handle set with steel core and oval rosette plates, upper door closer with slide channel, 2-leaf doors with closing sequence control and also optional with rebate retracting bolt.

Hinges
2 steel weld-on hinges for each leaf, 3-D adjustable.

Surface
powder-coated, primed RAL 9002, optional final paint-coating (if applicable extra

Cross section Presto, one-leaf door with side part, opening inwards

Cross section Presto, two-leaf door, opening inwards

Establishing the clear passage width with leaf open at 90°

Weld-on hinge 15 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 173 mm

Attention:
Installation height standard handle set 78 mm!

Establishing the clear passage width with leaf open at 90°

Srew-on hinge 25 mm pivotal spacing
Clear passage dimension (CP) =
Frame outer dimension (FOD) – 183 mm

Attention:
Installation height standard handle set 78 mm!

Construction:
Heat insulating ready-to-install steel door unit, type Therm. Construction made of electro-galvanized, yellow chromated precision profile steel tubes in monocoque construction as composite profile, with powder coatable PA 6.6 insulator as thermal separation. Frame profile and leaf profile surface-flushed with twofold EPDM stopper seal (circumferential on 3 sides).
The door is equipped with automatically lowerable floor seal as standard. Viewed width of frame and leaf 130 mm, base height 90 mm, structural depth 70 mm. Optional with additional fanlight and/or side-parts.

Fittings:
Right angle bent aluminum rounded handle set with steel core and oval rosette plates. Upper door closer Geze TS 5000 with slide channel, silver coloured, altern. Dorma TS 93 (prepared for mounting on hinge side), 2-leaf doors with integrated closing sequence control in slide channel.

Hinges:
Two 2-part steel weld-on hinges for each leaf, 3-D adjustable, with ball bearings.

Surface:
Electro-galvanized and yellow chromated, powder-coated primed in RAL 9002, optional powder-coated final paint-coating in RAL classic (against extra charge).

Glazing:
Heat protecting iso-glass 28 mm (EGS 6/ SZR 16 mm/ EGS 6; k-value = 1,1 W/m²K) dry glazing with rubber profiles.